Original tire Ninebot G30 G30D MAX

An original G30 tire that has a liner on the inside to stop if a slow  puncture occurs. This tire differs from the cheap copies out there which  are difficult/impossible to mount. To mount this tire easily, you need a  compressor that can quickly press 120-150 psi into the tire. Before  mounting it, have it in medium heat in the microwave for 2 minutes and  you can also lubricate the edges with thick grease. It must be thick  grease as it does not slide off the tire as easily when the tire is  being mounted. Then you inflate. The edges get easier to go over when  the tire is warm and has thick grease on it. The front is easier than  the rear rim for some strange reason. In some cases, it goes on easily  in some cases you have to move the part of the tire that doesn't quite  close to get another part of the tire to close last. Regarding tire  pressure, it is important to have over 55psi if you weigh up to 80kg, if  you weigh up to 90kg then 65psi, and around 100kg 70psi.

The price  stated is per tire. 

Installation at our location costs 499 for one tire  and 899 for two tires plus the price of the tires.